Page 143 of the City Engineer's Plat Book with two plats. Plat 1 shows land located near the intersection of Washington Street and Chapel Street, with two wharfs and the "site of the creek in 1801." Plat 2 shows lots and structures located on the west side of Washington Street.
A set of annual reports of the the Fire Department from 1859-1872. Reports missing for years 1862-1865. The annual reports open with a statement from the Fire Chief and include multiple lists of department expenses, financial cost of fires, the cause of the fires, and locations of city property pertaining to the fire department.
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 106 slaves held at the slave mart on Chalmers Street being sold "under decree in equity" by Charleston Master in Equity James Tupper. This sale is advertised as taking place on January 31, 1860 on behalf of "Winthrop and Rose, Trustees Ex-parte". The broadside lists the names, ages, and, for some, previous experiences or health conditions of the slaves for sale.
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 235 slaves held at the slave mart on Chalmers Street on January 9th, 1860 by the Shingler Brothers. The slaves being sold were part of the estate of General James Gadsden. The broadside lists the names, ages, and, for some, previous experiences or health conditions of the slaves for sale.
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 27 slaves held at the slave mart on Chalmers Street on January 13th, 1860 by the firm of Wilbur and Son. The advertisement describes the slaves as being accustomed to the cultivation of rice, cotton, and other provisions. The broadside lists the names, ages, and, for some, previous experiences of the slaves for sale.
Large bolt found on top of the head of a hammer and an adjustable wrench in the bottom of the submarine interior. Images show an x-ray photograph of the bolt prior to deconcretion, the bolt with concretion, and the bolt following deconcretion and conservation treatment with subcritical fluid technology.
Iron tool handle cast in a T-shape, with a square end. Images show the tool following removal from the submarine but prior to deconcretion, x-ray photograph of the tool, and the tool following deconcretion and conservation treatment with subcritical fluid technology.
Metal file composed of wrought iron, initially found resting on top of a ballast block on the interior floor of the submarine. Images show the initial site of the iron file during excavation and the file after deconcretion and conservation treatment with subcritical fluid technology.
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 102 slaves held at the slave mart on Chalmers Street on January 24th, 1860. The advertisement states that they are being sold "under decree in equity" as part of the case of Read, et al. Executors, vs Laurens, et al. James Tupper is listed as the Master in Equity directing the sale. The advertisement describes the slaves as being accustomed to rice and cotton cultivation. The broadside lists the names, ages, and previous experiences of the slaves for sale.
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 158 slaves held at the slave mart on Chalmers Street by Louis D. DeSaussure on March 13, 1860 by order of the executors of the estate of Thomas Bennett Lucas. The broadside lists the names, ages, and, for some, previous experiences or health conditions of the slaves for sale. It also describes that the slaves are "accustomed to working in a rice mill".
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 65 held at the slave mart on Chalmers Street by Alonzo J. White on January 23rd, 1860. The broadside lists the names, ages, and, for some, previous experiences or health conditions of the slaves for sale. It also describes that the slaves are accustomed to the cultivation of cotton and provisions.
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 33 slaves held at the slave mart on Chalmers Street by P.J. Porcher and Baya on January 23rd, 1860. The broadside lists the names, ages, and, for some, previous experiences or health conditions of the slaves for sale. It also describes that the slaves are accustomed to the cultivation of cotton, rice, and provisions.
This broadside is one of 15 found in the Hutson Lee papers advertising sales of slaves in Charleston in 1859 and 1860. This broadside advertises a slave auction of 25 slaves held at the slave mart on Chalmers Street on January 10th, 1860 by P.J. Porcher and Baya. The broadside lists the names, ages, and, for some, previous experiences or health conditions of the slaves for sale. It also describes the slaves are accustomed to the cultivation of rice, cotton, and other provisions.
Wooden part of bench for supporting and holding forward and central sections of the submarine interior bench, with notch cut out to fit around the submarine interior frame. Images show the concreted bench support following excavation and removal from the submarine; reverse-side view of concreted bench support; x-ray photograph of bench support; bench support following deconcretion, conservation treatment with polyethylene glycol, and cleaning; the reverse-side view of the same post-deconcretion condition; bench support following freeze-drying; and the reverse-side view of the support post-freeze-drying. Note the holes in all images where nails or screws were once held to attach the support to the forward and central bench.
Rudder composed of wrought iron, discovered on the exterior of the submarine beneath the stern end with a large portion portside. Images show excavated rudder with concretion of coral growth and sea urchin spicules, rudder following partial deconcretion, deconcreted rudder treated in caustic solution, and fully deconcreted and cleaned rudder.
Wooden shelf from forward bulkhead in the submarine interior, found laying horizontal to the original upright orientation of the submarine. Possibly made of pine, approximately 1 inch thick, with cut-outs to fit in the bulkhead of the submarine. Images show wooden shelf within the submarine interior during excavation and wooden shelf after removal, conservation treatment with polyethylene glycol, and freeze drying. Note the rust stains on both ends where bolts had been used to secure the shelf.
Nut and bolt once connected to iron bar in between interior aft pump and horizontal rod support. Images show initial connection to iron bar in the submarine interior, x-ray photograph of the bolt and nut and the adjacent bolt, corrosion of the bolt and nut after removal from concretion, and bolt and nut after conservation treatment with subcritical fluid technology.
Metal suspender button loop and portion of chain made of silver. Images show concreted loop following removal from submarine interior and initial cleaning, loop following partial deconcretion by mechanical cleaning, and mostly deconcreted loop following mechanical cleaning with chain portion still partially concreted.
Brass buckle with two prongs, possibly from a vest. Images show buckle following removal from the submarine interior with surrounding sediment and textile, and buckle following rinsing, cleaning, and thorough drying.
Clay smoking pipe bowl and stem, discovered in 2 pieces. Images show pipe in its original location within the submarine interior, stem and bowl pieces of the pipe following initial cleaning, and reconstructed pipe following conservation treatment.
Brass thimble, 1.5 cm in diameter. Images show close-up of thimble following removal from the submarine and the thimble following mechanical cleaning and thorough drying.
Wooden plank used as a bench for crew operating the crankshaft, with notches carved out to fit around the frame ring supports. Images show the third section of the bench alongside the second bench section within the submarine prior to removal and the 3 different sections of the bench after cleaning, conservation treatment with polyethylene glycol, and freeze drying. Note also the carving in the front of one of the sections, which was done by a crew member to better operate the aft ballast pump.
Cast iron cover from the starboard deadlight with rubber seal on the inside, removed from hinge on interior of the hull plate. Images show x-ray photograph of deadlight cover, deconcreted cover with rubber seal in place, and cover with rubber seal removed after conservation treatment with subcritical fluid technology.
Assortment of non-military buttons made of mother-of-pearl, all following surface cleaning and desalination. Images show seven two-holed buttons in varying conditions, four four-holed buttons in varying conditions, forward face of one no-holed button with metal shank and brass hoop back, and the reverse side of one no-holed button with metal shank and brass hoop back.
Wooden four-holed Army buttons with depressed center, made possibly from ash or similar wood. Images show buttons in varying conditions pre-conservation, four buttons showing forward face following cleaning and freeze drying treatment, and two buttons following cleaning and freeze drying treatment, one showing forward face and one showing reverse side.
Silver suspenders/braces clasp belonging to Lieutenant George E. Dixon, discovered with the straps’ rubber elastic fragments attached. Images show the clasp following removal from the submarine interior with rubber fragments still attached, close-up of reverse side of clasp with concretion partially removed by mechanical cleaning, close-up of engraved initials reading "G.E.D." on front face of clasp following mechanical cleaning, and full view of front face of the clasp following mechanical cleaning.
Wooden object, possibly a bucket or small cask, made up of staves with a solid wooden end forming the bottom. Images show some staves and wooden end of bucket in its initial location within the submarine interior sediment, staves and wooden end of bucket laid out following initial cleaning, with some staves still concreted together, and staves of bucket reconstructed with velcro bindings following conservation treatment with polyethylene glycol and freeze drying treatment.
Hammer made of wood and wrought iron, found laying against adjustable pipe wrench in the bottom of the submarine interior. Images show the initial location of the hammer on the submarine interior hull, the hammer concretion together with the pipe wrench following removal from the submarine, x-ray photograph of the hammer following separation from wrench concretion, and the hammer following partial deconcretion.
Open ended wrought iron pipe wrench. Images show heavily concreted wrench in its initial location on top of ballast block, and wrench after cleaning, deconcretion and conservation treatment with subcritical fluid technology. Second image shows the extremely fragile condition of the wrench following conservation.
Exterior hull plate, hemispherical (semi-circular), made of wrought iron with glass view ports. View ports include hinged cast iron deadlight cover with wrought iron pin lock on the interior of the hull to prevent light from appearing outside the submarine during night drills. Images show plate and view ports following submarine excavation and hull plate removal, x-ray photograph of view ports prior to deconcretion, view ports following deconcretion (removal of sediment concretion), and full deconcretion of hull plate and view ports, including the removal of glass and hinged deadlight covers.
Pencil composed of wood and coal, split into two halves. Images show the pencil pieces following its removal from the submarine interior sediment and pencil pieces following cleaning and freeze drying treatment.
Cylindrical canteen stopper made of cork. Images show two conditions of the cork stopper, the first showing the cork stopper following removal from submarine interior and initial cleaning, and the second showing the cork following super critical treatment.
Cylindrical canteen stopper made of cork. Images show two conditions of the cork stopper, the first showing the cork stopper following removal from submarine interior and initial cleaning, and the second showing the cork following super critical treatment.
Cylindrical canteen stopper made of cork. Images show two conditions of the cork stopper, the first showing the cork stopper following removal from submarine interior and initial cleaning, and the second showing the cork following super critical treatment.
Cylindrical canteen stopper made of cork. Images show two conditions of the cork stopper, the first showing the cork stopper following removal from submarine interior and initial cleaning, and the second showing the cork following super critical treatment.
Cylindrical canteen stopper made of cork. Images show two conditions of the cork stopper, the first showing the cork stopper following removal from submarine interior and initial cleaning, and the second showing the cork following super critical treatment.
Cylindrical canteen stopper made of cork. Images show two conditions of the cork stopper, the first showing the cork stopper following removal from submarine interior and initial cleaning, and the second showing the cork following super critical treatment.
Gold watch with attached chain and fob, found in mint condition. Images show watch in its initial location within the submarine interior during excavation, the watch with glass cover and sediment concretion on the glass, the inside watch face without the glass cover and the sediment contained within the watch, gears removed from the watch casing with evidence of corrosion, x-ray photograph of the gear mechanism, opposite side of the watch mechanism following conservation treatment, cleaned and treated watch with chain and fob, and close-up of the watch face and clamshell closure with glass and gold cover.
Twenty-dollar federal gold coin belonging to Lieutenant George E. Dixon, its shape warped into a shallow "U" shape by a high-velocity projectile (bullet). First image shows one face of the coin, which retains the face of lady liberty with the date 1860. The other two images show the opposite face of the coin, which exhibits the federal eagle and shield, as well as the words "United States of America" and "Twenty D." The coin has been intentionally filed flat for roughly half of its circumference and is inscribed with the following: "Shiloh...April6, 1862...My life Preserver...G.E.D."
D-ring shackle made of iron, used to support the spar boom as part of the spar torpedo system, uncovered from suction pile excavation area about 2.3 m forward and to starboard of bow. Images show shackle following excavation with thick and compact shell and sediment concretion, x-ray photograph of shackle, and shackle following deconcretion, conservation treatment with caustic solution, and cleaning.
Leather wallet belonging to one of the crew, made of two sides that fold in, once stitched together, and an additional pocket inside, with a reinforced band of leather for closing. Images show the wallet during the excavation of the submarine interior and the wallet following cleaning, conservation treatment, and freeze drying.
Large plank of wood, possibly pine, with an associated detached smaller plank, found in the submarine bow interior. Possibly cut from the same wood as the crew bench, the two pieces were nailed together at some point to construct and hold in place against an iron pipe the main seat for Lieutenant George E. Dixon. Images show wood bench in its initial location within the submarine interior, wood bench with detached support prior to deconcretion and cleaning, and deconcreted and reconstructed wood pieces following conservation treatment with polyethylene glycol.
Union navy uniform buttons, composed probably of brass or copper alloy, with raised upright foul anchor design on horizontal line background and rope border on forward face and backmark inscription that reads "Superfine Standard," with copper alloy attachment clip on back. Images show assortment of Union navy buttons following removal from the submarine interior sediment and initial cleaning, two buttons showing forward face and one showing reverse side and clip following mechanical cleaning, four buttons all showing forward face following mechanical cleaning, one button showing forward face and one button showing reverse side with keyring on eyelet following mechanical cleaning, two buttons showing forward face and one button showing reverse side with keyring on eyelet following mechanical cleaning, one button showing forward face and one button showing reverse side with clip following mechanical cleaning, and close-up of two buttons following mechanical cleaning, one showing forward face in background and one showing lateral view of reverse side with clip in foreground.
Left shoe, Brogan style, cut out of two main leather pieces with at least two metal nails in the heel and four eyelets for laces, two of them containing metal rings. Images show boot following removal from the submarine interior, x-ray photograph of the boot containing sediment and bone fragments, and boot following cleaning and freeze drying treatment.
Binoculars composed of copper alloy barrels (painted black), a horn focus knob, iron pins and 6 elliptical lenses as opposed to round. Images show the binoculars following removal from the submarine interior and initial cleaning, and binoculars after extensive soaking, cleaning, and conservation treatment.
Folding or straight razor knife, covers made of horn and all other components made of iron, with mineralized blade. Images show knife within heavy concretion and knife following deconcretion and conservation treatment.
Silk bandanna or neckerchief belonging to crewmember James Wicks. Images show the bandana following removal from the submarine interior and the bandana following cleaning, soaking, conservation treatment, and freeze drying.
Folding pocket knife, made of antler covers, German silver bolsters, and iron blades completely mineralized. Images show the pocket knife following removal from the submarine interior and the knife following cleaning and conservation treatment.
